The Compliant Mechanisms Research Group (CMR) is affiliated with the Brigham Young University Department of Mechanical Engineering. Contact information for the Department of Mechanical Engineering is provided below:

Department of Mechanical Engineering

Department of Mechanical Engineering
435 CTB
Brigham Young University
Provo, UT 84602
U.S.A.
Phone: 801.422.2625
Fax: 801.422.0516

CMR Faculty

Larry L. Howell 435 CTB
Brigham Young University
Provo, UT 84602
U.S.A.
E-mail: lhowell@byu.edu
Phone: 801.422.8037

Spencer P. Magleby 270 CB
Brigham Young University
Provo, UT 84602
U.S.A.
E-mail: magleby@et.byu.edu
Phone: 801.422.3151

Brian D. Jensen 435 CTB
Brigham Young University
Provo, UT 84602
U.S.A.
E-mail: bdjensen@et.byu.edu
Phone: 801.422.6030

CMR Secretary

Danielle Peterson 435 CTB
Brigham Young University
Provo, UT 84602
U.S.A.
E-mail: cmr-secretary@byu.edu
Phone: 801.422.6615

CMR Laboratory

The Compliant Mechanisms Research Laboratory is part of the Mechanical Design Research Laboratory in room 187 of the Clyde Building (187 CB).

CMR/Mechanical Design Research Laboratory
187 CB
Brigham Young University
Provo, UT 84602
U.S.A.
Phone (computer area): 801.422.4227
Phone (east wall): 801.422.5345

Getting Here

Directions to BYU and campus maps can be found at the Brigham Young University homepage.

The Department of Mechanical Engineering main office is located in room 435 of the Crabtree Technology Building (CTB). Take the elevator to the 4th Floor, turn right into the hall and 435 is on your left.

The Compliant Mechanisms Research Laboratory is located in room 187 of the Clyde Building (187 CB). Enter the NORTH door of the Clyde Building (facing the Fletcher Building), and go down the stairs immediately to your left. Go to the bottom of the stairs and turn left into the hall. Room 187 is the first door on your left.